Forum General OAV ACARS support V2 + XP11 no connection

V2 + XP11 no connection

Τεχνική υποστήριξη για το OAV ACARS. / Support fo OAV ACARS.
Post Sun Sep 17, 2017 6:43 pm

Posts: 15
Location: Roma - Italia
Name: Fabio Massari
Callsign: OAL178
Hi all,
as usual here I am with a connection problem. The V2 setup went ok, the program perfectly working. I logged in but I have always "waiting for connection" alarm on. As per manual, I added the linen on Xuipcoffets.cfg.
Maybe I made a mistake with spacing so here are the alines I added:

Dataref PosElevation sim/flightmodel/position/elevation float
OffsetOffset 0x34B0 FLOAT64 3 rw $PosElevation
Dataref TotalFlightTimeSec sim/time/total_flight_time_sec float
OffsetOffset 0x04A8 FLOAT64 3 rw $TotalFlightTimeSec

it is correct?
by the way, upgrading xp11 to the 05 version, I started to get xuipc ip address error. But I'm sure nothing changed or ip error occurred with other programs.

Thank you.
Ciao
Faio

Post Mon Sep 18, 2017 11:51 pm
OAL109 Mike Ionas User avatar
Administrator
Administrator

Posts: 1234
Location: Athens, Greece
Name: Mike Ionas
Callsign: OAL109

Hey Fabio,

Even without the above lines it should connect but read the altitude as 0. That is what these lines correct, the altitude reading.

I have added these lines putting a [tab] instead of a [space]. I attach my file for your reference:
XPUIPCOffsets.rar
XPUIPCOffsets
(7.15 KiB) Downloaded 11 times
to see how I added the lines.

Regarding the IP address error, I was getting that as well, but I opened XPUIPC.ini, changed the Server Address to my computer's IP address and it went away:
Server Address = xxx.xxx.xxx.xxx
Any chance your computer is changing IP address periodically causing this problem? If so, setting a static IP on your computer or a static reservation on your router should rectify this..
Image

Post Wed Sep 20, 2017 12:28 am

Posts: 15
Location: Roma - Italia
Name: Fabio Massari
Callsign: OAL178
Thank you Mike. Dowloaded the file. Tomorrow I'll try. For the IP address I've set a static one, so I wonder why ist is not recognised. Anyway I will make more test.
Thank you.
Ciao
Fabio

Post Wed Oct 04, 2017 6:42 pm

Posts: 1
Name: Christos Giannoulis
Callsign: OAL190
Hi to all
Although I have seen similar posts in the forum, I have not succeeded in linking XP 11 to V2 accars.
As per manual, I added the line on Xuipcoffets.cfg.

I use Xp11
WIN10 64
Net framework 4.7
Fly with lua
Xsb3
Xuipc I tested both versions 2.00 and 2.02
Sky max 4.6
JAR A320 and IXEg 737
In spite of persistent efforts and searching the internet for information or solutions, the accars remain red with the sign of waiting connection
I also installed the XP11 on a second disk and not on the primary where the P3d v3 is installed.
I note that the Accars OAV works normally for P3d v3
(Συγνώμη που χρησιμοποιώ αγγλικά αλλά ίσως να έχουν το ίδιο πρόβλημα και ξένοι φίλοι μας χρήστες του φόρουμ.)
Χρήστος Γιαννούλης

Post Thu Oct 05, 2017 9:08 am
OAL853 Nick Papandreou User avatar
Administrator
Administrator

Posts: 446
Name: Nick Papandreou
Callsign: OAL853
[Topics Merged]

To all, check if the following links helps.

https://forums.x-plane.org/index.php?/forums/topic/120263-xpuipc-problem-solved/

From the "official" XPUIPC forum (https://forums.x-plane.org/index.php?/forums/topic/66817-xpuipc-for-x-plane/&page=20) i read that you need to run either both XP and the tool (oav acars) in Admin mode or both not as Admin. In any case, first try executing oav acars as admin and check the results.

https://forums.x-plane.org/index.php?/forums/topic/66817-xpuipc-for-x-plane/&do=findComment&comment=1219317


Lastly, check if windows, other firewalls or antivirus prevent XPUIPC from communicating with XPLANE.

Check, test and report back!

P.S. The latest XPUIPC version seems to be 2.0.4.8?
Pilots' Manager
pilots@oav.gr
Image

Post Sun Oct 08, 2017 11:50 pm

Posts: 15
Location: Roma - Italia
Name: Fabio Massari
Callsign: OAL178
Connected!!!! Thank you all!!! I deleted everything from plugin, reinstalled, confirmed static ip for server and client and executed both programs as admin.

Post Mon Oct 09, 2017 7:19 pm
OAL109 Mike Ionas User avatar
Administrator
Administrator

Posts: 1234
Location: Athens, Greece
Name: Mike Ionas
Callsign: OAL109

Glad it worked Fabio!

XPUIPC can be a little tricky to set up; it took me some time and reading as well..
Image


Return to OAV ACARS support

cron